Medical Dosimetry
Volume 33, Issue 1 , Pages 36-41, Spring 2008

The Use of TLD and Gafchromic Film to Assure Submillimeter Accuracy for Image-Guided Radiosurgery

  • Anthony K. Ho, Ph.D.

      Affiliations

    • Theresa Po Cyberknife Center, Hong Kong Adventist Hospital, Hong Kong
    • Corresponding Author InformationReprint requests to: Anthony Ho, Ph.D., Hong Kong Adventist Hospital, Cyberknife Center, 40 Stubbs Road, Hong Kong.
  • ,
  • Iris C. Gibbs, M.D.

      Affiliations

    • Department of Radiation Oncology, Stanford University Medical Center, Stanford, CA
  • ,
  • Steve D. Chang, M.D.

      Affiliations

    • Department of Neurosurgery, Stanford University Medical Center, Stanford, CA
  • ,
  • Bill Main, Ph.D.

      Affiliations

    • Accuray, Inc., Sunnyvale, CA
  • ,
  • John R. Adler, M.D.

      Affiliations

    • Department of Neurosurgery, Stanford University Medical Center, Stanford, CA

Received 20 November 2006; accepted 27 April 2007. published online 22 November 2007.

Abstract 

The Cyberknife is an image-guided radiosurgical system. It uses a compact X-band 6-MV linear accelerator mounted on a robotic arm to deliver radiosurgical doses. While routine quality assurance (QA) is essential for any radiosurgery system, QA plays an even more vital role for the Cyberknife system, due to the complexity of the system and the wide range of applications. This paper presents a technique for performing quality assurance using thermoluminescence detectors (TLDs) and Gafchromic films that is intended to be specific for the Cyberknife. However, with minor modification, the proposed method can also be used for QA of other radiosurgery systems. Our initial QA procedure for the CyberKnife utilized a 30 × 30 × 11-cm solid water phantom containing a planar array of slots for 1× 1 × 1-mm TLDs on a 2-mm grid. With the objective of significantly simplifying CyberKnife QA, a new procedure for verification was developed, which uses much fewer TLDs than the prior solid water phantom technique. This new method requires only that the system target dose to the center of a cluster of 7 TLDs. In a prior study with Gafchromic films, conducted at 3 different Cyberknife facilities, the mean clinically relevant error was demonstrated to be 0.7 mm. A similar Gafchromic film analysis replicated these error measurements as part of the present investigation. It cannot be emphasized enough the importance of implementing routine QA to verify the accuracy of any radiosurgery system. Our quality assurance procedure tests the treatment planning system, as well as the entire treatment delivery including the image targeting system and the robot system. Either TLDs or Gafchromic films may be used for QA test of a radiosurgery system. Using both methods for measurement has the advantage independently verifying the accuracy of the system. This approach, which is routinely in used at our institution, has repeatedly confirmed the submillimeter targeting accuracy of our Cyberknife.

Key Words: Cyberknife, Quality assurance, TLD, Gafchromic film, Radiosurgery

To access this article, please choose from the options below

Login to an existing account or Register a new account.

  • Purchase this article for 31.50 USD (You must login/register to purchase this article)

    Online access for 24 hours. The PDF version can be downloaded as your permanent record.

  • Subscribe to this title

    Get unlimited online access to this article and all other articles in this title 24/7 for one year.

  • Claim access now

    For current subscribers with Society Membership or Account Number.

  • Visit SciVerse ScienceDirect to see if you have access via your institution.
 

PII: S0958-3947(07)00106-9

doi:10.1016/j.meddos.2007.04.009

Medical Dosimetry
Volume 33, Issue 1 , Pages 36-41, Spring 2008